Nikon MFX-1930 User Manual

Page 18

Advertising
background image

4-4

Network Interface

50%, 64% and 70% are not available in 200dpi.
– or –
Press [Advanced Functions] repeatedly until “Zoom” appears, then

press [Enter]. Press [ ] or [ ] to adjust the zoom ratio.

– or –
Enter your desired ratio (50 to 200 %) using the numeric keys.

NOTE: • Enlargement scanning can only be performed using the docu-

ment glass.

• The minimum reduction ratio is 75 % at 200 dpi.

• To reset the settings to the default, press [Reset].

Document type — Press [Doc. Resolution] then press [ ] or [ ] to

select the document type:
Text — Select this mode when scanning text.

Photo&Text — Select this mode when scanning documents containing

photographs or drawings and text.

Photo — Select this mode when scanning photographs or drawings.
Contrast — Press [Contrast] to set how light or dark you want the

documents to be. To avoid confusing the Light and Dark settings,
just remember — “Light lightens” and “Dark darkens” — to keep it
straight.

4

Press [Start].

Select Scan Box

01:01

5

Press [ ] or [ ] to select the scan box, then press [Enter].

If the scan box has an I.D. code other than 0000, the following display
will appear, and go to step 6. Otherwise, skip to step 7.

01:Store Document

Enter I.D. Code:****

6

Use the numeric keys to enter the scan box’s four-digit I D. code, then

press [Enter].
If you enter an invaild I.D. code the machine will return to the Standby
mode.

7

The machine will start scanning.

01:Store Doc.File: 1

A4 Mem100%

A file number is assigned to every document scanned into the scan box

(1 to 10).

File number

Advertising