Nikon MFX-1930 - Manual (Page 20)

4-6 Network Interface
4.4 Importing a document from a scanned box
Follow the steps below to access the TWAIN driver from your application
software:
1
Select the PC software program (Imaging, Photoshop, etc.). This proce-
dure uses Microsoft Imaging as an example.
NOTE: The process of selecting a scan device varies by application
software, please refer to your application software user’s guide for
assistance.
2
Click [File]  [Select Device…].
3
Choose “Muratec MFX-1930 Network Scanner” from the dialog box, then
click [OK].
4
Click [File]  [Acquire Image…].
5
Select the scan box you want to access.
If the scan box has an I.D. code other than 0000, the following dialog box
will appear. Enter the proper 4-digit I.D. code then click [OK].
6
The files in the selected scan box will be shown on the center frame.
If there is no file currently stored, nothing will be displayed in this frame.
7
Select the file you want to download, and then click [Download].
The selected file will be downloaded to your software application.