Nikon S640 User Manual
Page 93
81
Connecting to a Computer
Con
ne
cti
ng t
o Te
le
vi
sion
s, C
omputers
and Pri
nters
Transferring Pictures from the Camera to a Computer
1
Start the computer to which Nikon Transfer was installed.
2
Be sure that the camera is off.
3
Connect the camera to the computer using the supplied USB cable.
4
The camera automatically turns on.
The power-on lamp will light. The camera monitor will
remain off.
Windows Vista
When the AutoPlay dialog is displayed, click
Copy
pictures to a folder on my computer using Nikon Transfer. Nikon Transfer will start.
To bypass this dialog in the future, check
Always do this for this device.
Windows XP
When the action selection dialog is displayed, select
Nikon Transfer Copy pictures to
a folder on my computer and click OK. Nikon Transfer will start.
To bypass this dialog in the future, check
Always use this program for this action.
Mac OS X
Nikon Transfer will start automatically if
Yes was selected in the Auto-Launch setting
dialog when Nikon Transfer was first installed.
B
Connecting the USB Cable
• Be sure that connectors are properly oriented. Do not attempt to insert connectors at an angle,
and do not use force when connecting or disconnecting the USB cable.
• The connection may not be recognized if the camera is connected to the computer via a USB hub.