Nikon 9000ED - Manual (Page 66)

57
4 Snap the holder closed
5 Adjust the fi lm angle
Loosen the locking screw by rotating it
counter-clockwise. Adjust the angle, us-
ing the marks on the front of the holder
as a guide (each mark is equivalent to
1 °), and then tighten the locking screw.
Removing Film
Insert your fi ngers in the depressions and
pick the fi lm up by its edges.
Angle indicator
Locking screw
Depressions
Keep the Glass Clean
The inner surface of the glass cover been treated to prevent interference. Avoid leaving fi ngerprints or
other stains on the glass.