NEC uPD75P3116 - Manual

1994
DATA SHEET
The µPD75P3116 replaces the µPD753108’s internal mask ROM with a one-time PROM, and features expanded
ROM capacity.
Because the
µPD75P3116 supports programming by users, it is suitable for use in evaluation of systems in the
development stage using the
µPD753104, 753106, or 753108, and for use in small-scale production.
Detailed information about functions is provided in the following User’s Manual. Be sure to read it before
designing:
µPD753108 User’s Manual: U10890E
FEATURES
Compatible with
µPD753108
Memory capacity:
• PROM: 16384 × 8 bits
• RAM: 512 × 4 bits
Can be operated in same power supply voltage range as the mask version
µPD753108
• V DD = 1.8 to 5.5 V
On-chip LCD controller/driver
QTOP TM microcontroller
Remark QTOP microcontrollers are microcontrollers with on-chip one-time PROM that are totally supported by NEC.
This support includes writing application programs, marking, screening, and verification.
ORDERING INFORMATION
Part Number Package
µPD75P3116GC-AB8
64-pin plastic QFP (14 × 14)
µPD75P3116GK-8A8
64-pin plastic LQFP (12
× 12)
µPD75P3116GC-8BS 64-pin plastic LQFP (14 × 14)
Caution This device does not provide an internal pull-up resistor connection function by means of mask
option.
µ
PD75P3116
MOS INTEGRATED CIRCUIT
4-BIT SINGLE-CHIP MICROCONTROLLER
The mark shows major revised points.
Document No. U11369EJ3V0DS00 (3rd edition)
Date Published March 2002 N CP(K)
Printed in Japan
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for
availability and additional information.