Setting up a usb driver in windows 2000 – Nikon SBV5121 User Manual
Page 23
Advertising
SBV5121 VoIP Cable Modem User Guide
15
Setting Up a USB Driver in Windows 2000
1
Insert the SBV5121 VoIP Cable Modem CD-ROM in the CD-ROM drive. This CD contains the USB drivers
and must be inserted and read by the PC before you connect the VoIP cable modem to the PC.
2
Connect the VoIP cable modem to your computer with a USB cable. For further instructions, see
on page 8. A few seconds after you complete the USB connection, the Found New
Hardware Wizard window is displayed:
3
Click Next. The following window is displayed:
Be sure “Search for a suitable driver for my device” is selected.
Although your VoIP cable modem model number may be different than in the images in this guide,
the procedure is the same.
Advertising