Nikon SBV5121 - Manual (Page 32)

Introduction Installation Troubleshooting Glossary License
SBV5121 VoIP Cable Modem User Guide 24
5 Click Properties. The Local Area Connection Properties window is displayed:
6 If Internet Protocol (TCP/IP) is in the list of components, TCP/IP is installed. You can skip to step 10.
If Internet Protocol (TCP/IP) is not in the list, click Install. The Select Network Component Type window is
displayed: Continue with step 7.
7 Click Protocol on the Select Network Component Type window and click Add. The Select Network Protocol
window is displayed:
8 Click Internet Protocol (TCP/IP) in the Network Protocol section on the Select Network Protocol window.