Napco Security Technologies GEM-P1632 - Manual

R
INSTALLATION INSTALLATION
INSTRUCTIONS INSTRUCTIONS
G E M - R P 3 D G T L
Digital Keypad
WI982A 6/99 © Napco 1999
Quick Start:
1. Referring to the control panel wiring diagram, connect siren, aux. power, pgm.
output, remote bus, earth ground, zone and telephone wiring.
NOTE: See Installation Instructions for the appropriate control panel.
2. Connect AC power first and then the battery.
3. Configure the keypad (see page 3).
4. Access the Easy Menu Driven (Dealer Program) Mode:
Press
456789 A
Press NO( F
) Until “17” appears on the keypad display.
Press YES ( E) To Enter Easy Menu Driven Dealer Program Mode.
The Easy Menu Driven Program Mode will allow you to complete all basic programming
functions by answering questions which will allow the automatic programming of the
control panel.
F F
For the GEM-P816 and GEM-P1632, turn to page 5
F F
For the GEM-P3200 and GEM-P9600, turn to page 10
This guide is to be used in conjunction with the Programming Instruction Manual for the
respective control panel.
GEM-P816 - WI995
GEM-P1632 - WI897
GEM-P3200 - WI818
GEM-P9600 - WI777
Dealer Code
This Guide includes programming instructions for the
following control panels:
•
GEM-P816
•
GEM-P1632
•
GEM-P3200
•
GEM-P9600
GEM-RP3DGTL Keypad
R
COMPUTERIZED SECURITY SYSTEM
ARMED
STATUS
SYSTEM ARMED
01/01/97 12:00AM
1 2
4
3
5 6
7 8 9 0
A
B
C D E
F
G NEXT/YES
PRIOR/NO
AREA
GEMINI
ENT A1 17
INTERIOR BYPASS FIRE/TBL SYS TBL CHIME
For the GEM-P3200 and
GEM-P9600, use the
Master Security Code
printed on the control panel
microprocessor shield.