Removing memory cards – Nikon collpix L16 User Manual

Page 29

Advertising
background image

17

Inserting Memory Cards

First S

te

p

s

Removing Memory Cards

Before removing memory cards, turn the camera off
and confirm that the power-on lamp and the monitor
are off. Open the battery-chamber/memory card slot
cover and press the card in 1 to partially eject the card
2. The card can then be removed by hand.

B

Formatting Memory Cards

If the message at right is displayed, the memory card must be
formatted before use (

A 85). Note that formatting permanently

deletes all pictures and other data on the memory card. Be sure to
make copies of any pictures you wish to keep before formatting the
memory card.

Use the multi selector to choose Yes and press

k. A confirmation

dialog is displayed. To start formatting, choose Format and press

k.

Do not turn the camera off or open the battery-chamber/memory card slot cover until

formatting is complete.

The first time you insert the memory cards used in other devices into the COOLPIX L18/

COOLPIX L16, be sure to format them (

A 85).

B

The Write Protect Switch

Memory cards are equipped with a write protect switch.
Pictures cannot be recorded or deleted and the memory card
cannot be formatted when this switch is in the “lock” position.
Unlock by sliding the switch to the “write” position.

B

Memory Cards

Use only Secure Digital memory cards.
Do not perform the following during formatting, while data is being written to or deleted from the

memory card, or during data transfer to a computer. Failure to observe this precaution could result
in the loss of data or in damage to the camera or memory card:
- Eject the memory card
- Remove the battery
- Turn off the camera
- Disconnect the AC adapter

Do not disassemble or modify.
Do not drop, bend, or expose to water or strong physical shocks.
Do not touch the metal terminals with your fingers or metal objects.
Do not affix labels or stickers to the memory card.
Do not leave in direct sunlight, closed vehicles or areas exposed to high temperatures.
Do not expose to humidity, dust, or to corrosive gases.

1

2

Card is not formatted.

No

Yes

Format card?

Write protect switch

Advertising
This manual is related to the following products: