Troubleshooting, Display, settings and power supply – Nikon Coolpix S200 User Manual

Page 137

Advertising
background image

123

Te

chnica

l Note

s

Troubleshooting

If the camera fails to function as expected, check the list of common prob-
lems below before consulting your retailer or Nikon representative. Refer to
the page numbers in the right-most column for more information.

Display, Settings and Power Supply

Problem

Cause/Solution

c

Monitor is blank

• Camera is off.

• Battery is exhausted.

• Standby mode for saving power: press

the shutter-release button halfway.

• When flash lamp blinks red, wait until

flash has charged.

• Camera and TV are connected via A/V

cable.

• Time lapse or interval timer photogra-

phy in progress.

11

20

21,

24,

109

29

70

62, 89

Monitor is hard to read

• Adjust monitor brightness.

• Monitor is dirty. Clean monitor.

• Monitor has dimmed to save power.

Monitor brightens when controls are

used.

106

118

21

Camera turns off without warn-

ing

• Battery is low.

• Camera has turned off automatically

to save power.

• Battery is cold.

20

21,

109

117

Date and time of recording are

not correct

• Pictures recorded before clock has

been set, and “Date not set” indicator

blinks during shooting, will have time

stamp of “00/00/0000 00:00”; movies

and voice recordings will be dated

“01/01/2007 00:00.”

• Check camera clock regularly against

more accurate timepieces and reset as

required.

16,

103

103

No indicators displayed in moni-

tor

[Hide info] is selected for [Photo info].

Select [Show info].

106

[Date imprint] not available

Camera clock has not been set.

16,

103

Advertising
This manual is related to the following products: