Operating net command-controlled devices – Nikon DLP 837 Series User Manual

Page 48

Advertising
background image

48

5. NetCommand IR Control (837 Series)

S pecial Operation Methods

Key Name in
Learning Screen

Special Operation Description and Setup

How to Use

Power On

Manual Power On/Off

Use for devices that have only one POWER key.

Press

1.

ACTIVITY.

Press

2.

to highlight the icon for the

device to be powered on or off.

With the

3.

Activity menu still displayed, press

POWER to send the power signal; you may
need to press POWER twice.

Note: If you press POWER without the Activity

menu displayed, the TV will turn off.

Press

4.

ENTER to switch the TV to the device.

Power On

Power Off

Automatic Power On/Off

This feature is only for devices that have separate
POWER ON and POWER OFF keys on their original
remote controls. If your device does not have a
separate POWER OFF key, do not use the Power
Off
learning position; use only the Manual Power
ON/OFF method described above.

In the NetCommand Learn screen:

a. “Learn”

the

Power On command in the

Power On learning position.

b. “Learn”

the

Power Off command in the

Power Off learning position.

To Power On the Device

Press

1.

ACTIVITY.

Press

2.

to highlight the icon for

the device to be powered on or off.

Press

3.

ENTER to switch the TV to the

device and NetCommand will send the
Power On command to the device.

To Power Off the Device

When you turn the TV off, the TV sends all
learned Power Off commands to all devices.

Menu

Displaying a Menu for the Current Device

“Learn” the MENU key on the original remote in the
Menu learning position.

Press MORE and then 1 to send the menu
command to the current device.

Guide

Displaying the On-Screen Program Guide
(cable box or satellite receiver)

“Learn” the

1.

GUIDE key on the original remote in

the Guide learning position.

Learn the

2.

PAGE UP and PAGE DOWN keys of the

original remote in the Page Up and Page
Down
learning positions.

While watching the device, press

1.

GUIDE to

display the guide.

Press

2.

PAGE UP/DOWN (

) to send the Page

Up/Dn commands for the guide.

Operating Net Command-Controlled Devices

Controlling Most Device Types

As an example of NetCommand control, if you are
watching your cable box and you wish to tune to the
next channel higher, press CHANNEL UP. NetCommand
then sends the “learned” channel-up control signal to
the cable box.

Perform NetCommand setup for the device as

1.

described in this chapter.

When you wish to use the device, press

2.

ACTIVITY.

Press

3.

to highlight the icon for the device.

Press

4.

ENTER to switch the TV to the device.

Note: if you have set up automatic input switching for

the A/V receiver, the A/V receiver will automati-
cally switch to the correct input for the device.

To operate the device using the

5.

TV’s remote

control, press the side button to put the remote
control into TV mode.

Point the remote control at the

6.

TV (not the device)

and press the key for the desired function.

Press the

7.

MORE key to access additional key func-

tions you may have “learned” for the device.

Advertising
This manual is related to the following products: