Removing memory cards – Nikon CoolPix S202 User Manual

Page 31

Advertising
background image

19

Inserting Memory Cards

Fi

rst S

te

p

s

Removing Memory Cards

Before removing memory cards, turn the camera off
and confirm that the power-on lamp is off. Open the
battery-chamber/memory card slot cover and press the
card in 1 to partially eject the card 2. The card can
then be removed by hand.

B

Formatting Memory Cards

If the message at right is displayed, the memory card must be
formatted before use (

A 103). Note that formatting permanently

deletes all pictures and other data on the memory card. Be sure
to make copies of any pictures you wish to keep before formatting
the memory card.

Use the multi selector to choose Yes and press

k. The

confirmation dialog will be displayed. To start formatting, choose
Format and press

k.

Do not turn the camera off or open the battery-chamber/memory card slot cover until

formatting is complete.

The first time you insert the memory cards used in other devices into the COOLPIX S202, be sure to

format them using this camera (

A 103).

B

The Write Protect Switch

SD memory cards are equipped with a write protect switch.
Pictures cannot be recorded or deleted and the memory card
cannot be formatted when this switch is in the “lock” position.
Unlock by sliding the switch to the “write” position.

B

Memory Cards

Use only Secure Digital memory cards.
Do not perform the following during formatting, while data

is being written to or deleted from the memory card, or during data transfer to a computer. Failure
to observe this precaution could result in the loss of data or in damage to the camera or memory
card:
- Take out the battery or memory card
- Turn off the camera
- Disconnect the AC adapter

Do not format the memory card using a computer.
Do not disassemble or modify.
Do not drop, bend, or expose to water or strong physical shocks.
Do not touch the metal terminals with your fingers or metal objects.
Do not affix labels or stickers to the memory card.
Do not leave in direct sunlight, closed vehicles or areas exposed to high temperatures.
Do not expose to humidity, dust, or to corrosive gases.

Card is not formatted.
Format card?

No

Yes

Write protect switch

Advertising
This manual is related to the following products: