Manual adjustment, Electronic adjustment, Filling the salt container – AEG ELECTROLUX F 55420 W 0 P User Manual

Page 32

Advertising
background image

Manual adjustment

Turn the water hardness dial to the posi-
tion 1 or 2.

Electronic adjustment

1. Press the on/off button to activate the

appliance.

2. Make sure that the appliance is in set-

ting mode. Refer to ‘SETTING AND
STARTING A PROGRAMME’.

3. Turn the programme knob until the

display shows two horizontal status
bars.

4. Press and hold Multitab and Delay at

the same time until the indicators

,

, and

flash.

5. Press Multitab.

• The indicators

and

go off.

• The indicator continues to flash.
• The display shows the setting of the

water softener. Example:

= lev-

el 5.

6. Press Multitab again and again to

change the setting.

7. Deactivate the appliance to confirm.

FILLING THE SALT CONTAINER

CAUTION!
Only use dishwasher salt. Other
products can cause damage to
the appliance.
Water and salt can come out from
the salt container when you fill it.
Risk of corrosion. To prevent it, af-
ter you fill the salt container, start
a programme.

1.

Turn the cap counterclockwise and
open the salt container.

2.

Put 1 litre of water in the salt contain-
er (only for the first time).

3.

Fill the salt container with dishwasher
salt.

4.

Remove the salt around the opening
of the salt container.

5.

Turn the cap clockwise to close the
salt container.

32

Advertising