Select a channel – Nikon ASTRO XTS-5000 User Manual
Page 35
22
General Radio Operation
Select a Channel
Consult a qualified radio technician for the right choice between the
following methods:
Use the Preprogrammed 16-Position Select Knob
Use the Menu
Entry CHAN
After the zone you want is
displayed, turn the
16-Position Select knob to
the desired channel.
1
Press
u to find CHAN.
2
Press
D, E, or F
directly below CHAN.
The display shows the cur-
rent channel name (in this
case, DISP NW) blinking and
the zone (POL), not blinking.
3
Press
u to find the channel
name you want.
4
If the channel you selected is
unprogrammed, repeat
step 3.
5
Press
h to confirm the
displayed zone and channel.
OR
Press the PTT button to
transmit on the displayed
zone/channel.
Select
Channel
CHAN
POL DISP NW
POL DISP SE
UNPROGRAMMED
POL DISP SE
94C26-K_XTS5000Mdl2.book Page 22 Friday, April 25, 2008 9:48 PM