Nikon PD-10 - Manual (Page 11)

5
En
Connecting the PD-10 to a Printer
1
Connect the USB cable of the
PD-10 to the PictBridge connector
on the printer.
2
Turn the printer on and check that
it is ready to print.
• Do not perform any operations with the
PD-10 until the printer is ready to print.
3
Press the START button on the
PD-10 to turn it on.
• The POWER lamp on the PD-10 lights,
and the LINK lamp changes from orange
to yellow green. The PD-10 is ready for
wireless connection.
Once a connection is established:
• If this is the first time the PD-10 is used
with the camera:
Proceed to p.6.
• To perform wireless printing:
Proceed to p.8.
POWER
LINK BUSY
START
POWER
1
22
3