Specifications – Nikon LS-2000 User Manual

Page 54

Advertising
background image

- 54 -

Specifications

Specifications

LS-2000

Film:

35 mm film
Positive and negative film, both color and
monochrome, may be used. Film may be
mounted as 35 mm slides (mounts must be
1.0 mm–3.2 mm thick) or strip film of up to
six frames.

IX240 film cartridge

Scanning system: Fixed-film, movable plane-scanning single-pass

optical system

Sensor:

2592 linear-pixel CCD image sensor

Light source:

Red, green, and blue (RGB) LEDs

Color separation: Performed by RGB color LEDs

Valid scanning range:

24.3 mm x 36.5 mm at a resolution of 2592 x
3894 pixels (note that the SA-20 strip-film
adapter has an aperture of 23.4 x 35.4 mm)

Pixel size:

Square 9.4

µ

m x 9.4

µ

m pixels

Optical resolution:

Maximum 2700 pixels/25.4 mm, or 2700 dpi
(at film surface)

Analog-to-digital conversion:

12 bits for each color

Output:

Full color (8 or 12 bits for each color)

Focus:

Autofocus

Interface:

SCSI-2 compliant, half-pitch 50-pin connec-
tors (x 2)

Dimensions:

85.5 mm (W) x 275.0 mm (D) x 142.0 mm
(H) (3.37

″ Ч

10.83

″ Ч

5.59

)

Weight:

Approx. 2.4 kg (5 lbs 5.7 oz)

Power supply:

100–240 VAC, 0.3–0.2 A, 50/60 Hz

Operating environment:

Operating temperature

+ 10ºC (50ºF) to +35ºC (95ºF)

Humidity

20% to 85% (no condensation)

MA-20 S

LIDE

M

OUNT

A

DAPTER

Film:

35 mm slides, 1.0–3.2 mm thick
(with FH-2 film holder) 35 mm film strips of
one to six frames

Operating mode: Inserted in LS-2000 adapter slot

Dimensions:

70.3 mm (W)

×

158.0 mm (D)

×

49.0 mm

(H) (2.77

″ Ч

6.22

″ Ч

1.93

)

Weight:

Approx. 100 g (3.6 oz.)

Advertising