Nikon P5100 - Manual (Page 144)

130
Basic Camera Setup: The Setup Menu
S
h
oot
in
g, Playba
ck an
d
S
e
tu
p Me
nu
s
i Sound Settings
Adjust the following sound settings.
k Auto Off
If no operations are performed for the selected length of time, the monitor will
turn off and the camera will enter standby mode (
A 23) to reduce the drain on
the battery. The power-on lamp will blink in standby mode. If no operations are
performed for about another three minutes, the camera will turn off automatically.
Choose the time allowed to elapse before the camera enters standby mode. The
time options are [30s], [1m] (default setting), [5m], and [30m].
C
Notes on Auto Off
Regardless of the option selected, the monitor will remain on for three minutes when menus are
displayed, or for 30 minutes during continuous playback for slide shows or when the AC Adapter
EH-62A (available separately from Nikon) is connected.
Button sound
Turn button sound on or off.
When [On] (default setting) is selected, a beep will sound once when operations are
completed successfully, twice when the camera acquires focus on the subject, and
three times when an error is detected. Start-up sound will also play when the
camera is turned on.
Shutter sound
Choose shutter sound from [On] (default setting) or [Off].