Nikon P5100 - Manual (Page 32)

18
First Ste
p
s
Setting Display Language, Date and Time
A language-selection dialog is displayed the first time the camera is turned on.
1
Press the power switch to turn on the camera.
The power-on lamp will light and the monitor will turn
on.
2
Use the multi selector to choose the desired
language and press
k.
For information on using the multi selector, see “The Multi
Selector” (
A 10).
3
Choose [Yes] and press
k.
If [No] is selected, the date and time will not be set.
4
Press
k.
D
Daylight Saving Time
If daylight saving time is in effect, turn on [Daylight saving] in the time zone menu and set the date.
1 Before pressing k, press the multi selector I to choose [Daylight saving].
2 Press k to enable daylight saving time (w). Pressing k toggles the daylight saving time option
on and off.
3 Press the multi selector H, and then press k to proceed to step 5.
When daylight saving time ends, turn [Daylight saving] off from the date menu ( A 123) in the setup
menu. The camera’s clock is automatically set back one hour.
Set time and date?
No
Yes
Date d
w
Time zone
London, Casablanca
Daylight saving