Nikon Speedlight SB-600 - Manual (Page 12)

12
Control buttons
Two-button control function
Press two buttons simultaneously to perform the following operations.
Follow the procedures shown on the flash unit.
a
button
Press to set the flash mode (p. 26).
• Press to adjust the settings in the Custom
Settings mode (p. 52).
• Press to choose the desired settings when
setting the remote flash unit (p. 61).
ZOOM button
Press to change the zoom-head position (p. 40).
• Press to adjust the settings in the Custom
Settings mode (p. 52).
FLASH button
Press to test fire the flash (p. 20).
i
button/
j
button
Press to increase or decrease the values.
• Press to choose the desired settings in
the Custom Settings mode (p. 52).
• Press to adjust the settings when setting
the remote flash unit (p. 61).
ON/OFF button
Press for approx. 0.3 second to turn the power on
or off.
Recalling the underexposure value in the
TTL auto flash mode
Press the
s and a buttons simultaneously to
recall the underexposure value (p. 29).
Resetting the settings to default values
Press the
a and b buttons simultaneously for
approx. 2 seconds to reset all settings, including the
custom settings, to their default settings.
Button lock
Press the
a and j buttons simultaneously for
approx. 1 second to lock the functions of the control
buttons (except the
b and FLASH buttons) to avoid
accidental malfunction. Press the buttons again to
release the lock.
Switching to Custom Settings
Press the
s and j buttons simultaneously for
approx. 2 seconds to enter the Custom Settings mode
(p. 52).
ZOOM
MODE
MODE
MODE ZOOM