Synchronization during continuous flash shooting – Nikon Speedlight SB-600 User Manual

Page 38

Advertising
background image

38

Do not exceed the maximum number of continuous firings

You should allow the SB-600 to cool off for at least 10 minutes after the
maximum number of continuous firings are performed as shown in the
table below:

Max. number of continuous firings

Flash mode

Max. number of continuous
firings
(at 6 frames/sec.)

TTL auto flash
Manual flash (Flash output level: M1/1, M1/2)

15

Manual flash (Flash output level: M1/4 to M1/64)

40

Synchronization during continuous flash shooting

The table below shows the maximum number of frames that can be taken
during continuous flash shooting. If the number of continuous frames shot
exceeds the value shown in the table, allow the SB-600 to cool off for at least
10 minutes.

Maximum number of frames during continuous flash shooting
(at six frames per sec.)

Batteries

Flash output level

1/8

1/16

1/32

1/64

Alkaline-manganese

Lithium

Nickel

Up to 4

Up to 8

Up to 16

Up to 30

NiCd

Ni-MH

Notes on continuous flash shooting

WARNING

Advertising