National Public Seating 8200 MELODY CHAIR DY82 User Manual

Assembly instructions, Dy82 chair dolly, For 8200 melody chair

Advertising
background image

Assembly Instructions

DY82 CHAIR DOLLY

FOR 8200 MELODY CHAIR

Mailing Address: 149 Entin Road, Clifton NJ 07014

|

Tel 800-261-4112

| Fax 973-594-1500

PLANTS IN

| CLIFTON, NJ 07014

| MEMPHIS, TN 38106

| CHINO, CA 91710

Dear Customer,
Thank you for your purchase. Although extreme care goes into manufacturing
& packaging of this product, mistakes are possible. If you encounter any
missing parts or difficulty in assembly, etc. please call our customer service —
TOLL FREE at 1-800-261-4112 for courteous & immediate resolution to
your problem.

CAUTION!

Double-check that all screws are tightened securely before

use. Failure to completely tighten the screws may result

in tipping & possible injury! Recheck all screws periodically.

PARTS & HARDWARE

• One Inner Rack

• One Outer Rack (with crossbars)

• Bottom frame

• Four casters (two swivel & two non-swivel)

• (16) 7/8" cap-screws (A)

• (4) 1-1/2" cap-screws (B)

• (2) 2-1/4" cap-screws (C)

• (22) lock nuts

TOOLS NEEDED:

• 1/2” Combination Wrench, Ratchet with a 1/2" Socket

STEP 1.

Install the two non-swivel casters at one end of the frame, using

four (A) caps-screws and lock nuts in each.

STEP 2.

Install the two swivel casters at the other end of the frame, using

four (A) cap-screws and lock nuts in each.

STEP 3.

Starting at the end of the unit with swivel casters, attach the Outer

Rack to the inside of the caster support frame (see picture 1)

using two (B) cap-screws and lock nuts.

STEP 4.

Attach the Inner Rack to the outside of the caster support frame

(see picture 1) at the end of the unit with the non-swivel casters,

using two (B) cap-screws and nuts.

STEP 5.

Insert the Inner Rack in between the two lower crossbars on the

Outer Rack (see picture 2). After aligning the holes on both racks,

use two (C) cap-screws and lock nuts to attach.

PICTURE 1

STEP 3
Attach Outer Rack to
inside of caster
support frame

STEP 4
Attach Inner Rack to outside of
caster support frame

PICTURE 2

Insert the inside rack in between the two

lower crossbars on the outer rack

Inner Rack

Attachment

Outer Rack

Attachment

10/30/2006

OUTSIDE RACK

INSIDE RACK

Advertising