NuTone NC300 series - Manual

models nm 100 • nc 300
Page 
caution
warning
to reduce the risk of fire, electric shock, or
injury to persons, observe the following:
1. Read all instructions carefully before installing or using the
NM100/NC300 System.
2. The NM100/NC300 must be installed by a qualified dealer or
installer, and must conform to all local building and electrical
codes.
3. Adhere to all warnings on the NM100/NC300 and in
these instructions. Follow all operating and installation
instructions.
nm100/nc300 series
operating manual
read and save these instructions
system overview
• Do not expose the NM100/NC300 to moisture. Doing so can
create fire or shock hazards and void the warranty.
• Do not attempt to service this product yourself as opening or
removing covers may expose you to dangerous voltage or
other hazards and will void your warranty. Neither the Master
Station nor the Room/Patio Stations contain any user-
serviceable parts. REFER ALL SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude to
constitute a risk of shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the product.
• Use only NuTone replacement parts and have them installed
by a NuTone dealer or installer. Unauthorized substitutions
can result in fire, electric shock, or other hazards.
• Upon completion of any service or product repair, have the
NuTone dealer or installer conduct a safety check to ensure
the system is in proper operating condition.
• Use only a damp cloth to clean the Master Station, Remote
Stations, Door Stations, and speakers. Do not use liquid
cleaners or aerosol cleaners.
The NM100 is an intercom and sound system designed for
today’s home. Its compact size and modern, elegant look
complement any décor. The NM100 offers more than just
sensible good looks. It gives you peace of mind as it allows you
to communicate with family members and monitor specified
rooms. The NM100 offers high quality sound throughout your
home from several sources, including the radio, CD player or
other connected audio sources in your home.
Please read all of the safety instructions before changing any
settings on your NM100.
Keep this manual in a safe place for future reference. If you
lose the manual, you can download it from the NuTone web site
(www.nutone.com).
The NM100 is a retrofit system designed to use your existing
intercom wiring and consists of three major components:
• Master Station
• Indoor/Outdoor Remote Station—You can install up to 9
Remote Stations in individual zones, 15 Remote Stations in
shared zones on a 4-wire (M&S Systems retrofit) installation
and 13 Remote Stations in shared zones on a 3-wire (NuTone
retrofit), including 2 Outdoor Remote Stations.
• Door Station—You can install up to 3 Door Stations.
master station
The Master Station gives you control over the system intercom
and music capabilities. System setup is established at the master.
These settings include: set the clock and establish music auto
on/off times, select the system music source, save preset radio
stations and set the scan mode. System volume, loudness,
treble and bass can also be controlled from the NM100 master.
Intercom functionality for each Remote Station is established
at the master by setting the intercom selector switches. Each
remote station can be set to Intercom Only, Radio and Intercom,
Off, or Monitor.
The NM100 provides the ability to monitor other stations and
communicate with Door Stations. System functionality can
also be established to provide Security and Home Automation
features.
indoor/outdoor remote stations
The Remote Stations provide intercom functions and system
music control capabilities. Depending on the room configuration
at the Master Station, a remote station can communicate with
or monitor other stations and communicate with the Door
Stations. The system’s music can be turned on and off, music
volume adjusted, and music sources changed from the remote
stations.