Nikon NP2000 User Manual

Page 9

Advertising
background image

9

4

4.Setting the LAN Settings for Macintosh

4

Enter a new location name and click the [OK] button.

Enter “IEU2” as an example.

5

Click [Show] and [AirPort].

• For wired LAN connection, click [Built-in Ethernet].

After change to [Built-in Ethernet], set “Manually” in [Configure IPv4] to specify the

IP address and other configurations (

page 15 ) or set “Using DHCP”.

Note

If neither Airport card nor Airport extreme card has been inserted in the Macintosh

computer, [AirPort] cannot be chosen.

6

Click the [Apply Now] button.

7

Click the [

] button at the upper left on the Network configuration window.

The Network configuration window will be closed.

Advertising