Removing and reinstalling the faceplate, How to use this guide – Nikon UX5000 User Manual

Page 3

Advertising
background image

Removing and Reinstalling the Faceplate

To remove the faceplate

(if installing a custom DESI label):

1.

Put your finger in the recessed
area under the faceplate and lift
off the faceplate.

To reinstall the faceplate:

1.

Remove the old label, then insert the
customized replacement DESI label.

2.

Replace and press down on the
faceplate as shown.

3

Setting Up Your

Terminal

How To Use This Guide

When using the instructions in this user guide, you:

1

. Dial a digit on the key pad. For example:

– For line keys, dial

#903

.

2

. Press a Programmable Function Key or Fixed Function Key. For example:

– Press

CONF

.

3

. Push a Soft Key. For example:

– Push

Dir

.

Service Codes and Program entries may vary depending on installation. You may want to check with your
Communications Manager.

See the next page for a quick tour of your terminal’s layout and keys.

0913401_rev3-01-high.qxd 5/22/08 2:54 PM Page 3

Advertising