Nikon LS8000 - Manual (Page 2)

Install Nikon Scan scanner driver software
The procedure for installing the soft-
ware differs depending on whether
you are using a Windows or Macintosh
computer.
Set up the scanner and connect it to your
computer
Place the film to be scanned in a film holder
Windows users will need to register the scanner with Windows when connecting
the scanner for the first time.
Connect the scanner to the computer.
Registration of the scanner as a new de-
vice is necessary only under Windows.
Windows
Macintosh
See 16
See 21
Connect the scanner
Register the scanner
See 25
See 27
Different holders are used for different types of film.
Insert the holder into the scanner and scan the
film using Nikon Scan
Basic scanning
The scan window
See 61
See 118
○○○○
○
○
○
○
○
○○
○○○○○○○
○
○
○
○○○○○○○○○○○○○○○
○○○○○○○
○
○
○
35-mm film (in strips) Use the FH-835S See 56, 81
See 87 35-mm slides Use the FH-835M
Medium-format
(Brownie) film Use the FH-869S,the FH-869G (avail-
able separately), or the FH-869GR
(available separately) See 90
See 99
See 103
Medium-format slides Use the FH-869M (available separately) See 96
Use the FH-869GR (available separately)
Panorama film,
electron microscope film,
medium-format film
See 103
Use the FH-816 (available separately) 16-mm film (in strips) See 107
Use FH-8G1 (available separately) Microscope slides of
prepared tissue samples See 112
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Scanning Guide