Nikon LS8000 - Manual (Page 58)

48
Windows 98 Second Edition (SE)
Registering the Scanner with Windows 98 SE
Before beginning device registration, make sure that you have completed the IEEE 1394 up-
date described in “Installing the IEEE 1394 Update for Windows 98 Second Edition” (
17).
1 Turn the computer on
Make sure that the computer is on, and that the scanner is off and connected to the
computer via the IEEE 1394 cable.
2 Turn the scanner on
Turn the scanner on and wait for Windows to display a message.
If the Insert Disk Dialog is displayed
If a message appears prompting you to
insert the Windows 98 Second Edition
CD, click OK and proceed to step 3a. Do
NOT
insert the Windows 98 Second Edi-
tion CD.
If the Add New Hardware Wizard is
displayed
If the dialog shown at right is displayed,
click Next and proceed to step 3b.
If no message is displayed
If no message is displayed after sixty sec-
onds, proceed to “Updating the Device
Driver (Windows 98 SE)” (
53).
3 a
Locate “ntmap.sys”
The dialog shown at right will be dis-
played. Click Browse.