Eizo FP-2100W User Manual

Installation, Removing, Cleaning

Advertising
background image

Note

Note

Please be careful not to scratch the LCD panel or the cabinet with the panel protector during installation. Also please do

not remove the panel protector often. It may scratch or result in damage to the LCD panel.
The panel protector has a non-glare treatment side and a glossy side. Use preferable side.
When using LCD monitor with optional panel protector, it is preferable to avoid using downwards. In this condition, the

panel protector might become bend or slip out from the monitor.

Installation

Before installation, please remove dust and stains from the LCD panel.

1.

2.

1. Set the panel protector into the grooves of the panel frame; the lower fi rst (1), then the upper (2).

2. With the enclosed tool (Lever) set the tabs of the panel protector into the side grooves (4 tabs).

Put the lever on the tabs of the panel protector and move it toward the LCD panel to install. Position the protector into the
LCD panel tightly without leaving an opening.

Removing

Put the lever on the tabs of panel protector and move it toward the cabinet to remove.

Cleaning

Note

Note

Please be sure to keep the panel protector immobilized while cleaning it. Otherwise it may scratch the surface of the LCD

panel. To hold the panel protector by hand, use a soft cloth to avoid dust or fi nger prints.
Never use thinner, benzene, alcohol (ethanol, methanol, or isopropyl alcohol), abrasive cleaners, or other strong solvents,

as these may cause damage to the cabinet or panel.

The panel surface can be cleaned with a soft cloth such as cotton or lens paper.

If necessary stubborn stains can be removed by moistening part of the cloth with water to enhance its
cleaning power.

Tips

It is recommended to use EIZO cleaning kit “ScreenCleaner” (option) to clean the panel.

Specifi cation

Surface treatment

Non-glare side: non glare hard coating / Glossy side: hard coating

Coating strength

2H

Refl ectivity

Less than 6.8 %

Light transmission

More than 90 %

Dimension/ Weight

476.8 mm (W) × 299.4 mm (H) × 1.0 mm (D) / approx. 175 g

Accessories

Lever (for Panel Protector), User’s Manual


(1)

(2)

Lever

Copyright© 2007 EIZO NANAO CORPORATION All rights reserved.

00N0L357B1

(U.M-FP2201W)

Advertising