Nikon LS-30 - Manual (Page 40)

- 40 - Using the Scanner: Using the IX240 Film Adapter
Inserting film
IX240 film must be developed before it can be scanned. To
determine whether a roll of IX240 film has been developed,
examine the end of the film cartridge where its current status is
marked. If there is a white square showing in the fourth box,
the film has been developed and can be scanned.
To scan IX240 film, press the latch button to open the adapter
cover.
Insert the film cartridge in the film chamber as shown below.
Close the cover, pushing it closed until the latch snaps into
place. The scanner will automatically feed film from the IX240
cartridge into the scanner. For details on scanning IX240 film,
see the software reference manual.
Note: If no operation is performed for several minutes, the film
will automatically be wound back into the canister. Film will be fed
into the scanner once more when the Nikon Scan scan window is
opened or a preview or thumbnail scan is performed.
Latch button
This way up
Direction of insertion