3 connecting the scsi cable – Nikon AX-210 User Manual

Page 29

Advertising
background image

Nikon

ScanTouch 210 User's Manual

19

4.3

Connecting the SCSI Cable

Before connecting the SCSI cable, confirm that all SCSI devices,
including the computer system, have been turned off.

Power OFF

Connect the unit to the computer using the SCSI cable provided. After
attaching the connector, be sure to lock it in place. You can connect the
SCSI cable to either of the SCSI connectors (50-pin and 25-pin) on the
rear panel of the unit.

Caution:

Do not touch the pins of the SCSI connector. This can

result in static damage.

4. Connecting the Scanner

Advertising