NETGEAR N300 ROUTER WNR2000 - Manual (Page 98)

NETGEAR Wireless-N 300 Router WNR2000 User Manual
5-18 Fine-Tuning Your Network
v1.3, July 2009
To change the MTU size:
1. In the main menu, under Advanced, select WAN Setup.
2. In the MTU Size field, enter a new size between 64 and 1500.
3. Click Apply to save the new configuration.
Quality of Service
Quality of Service (QoS) is an advanced feature that can be used to prioritize some types of traffic
ahead of others. The WNR2000 router can provide QoS prioritization over the wireless link and on
the Internet connection.
Using WMM QoS for Wireless Multimedia Applications
The WNR2000 router supports Wi-Fi Multimedia Quality of Service (WMM QoS) to prioritize
wireless voice and video traffic over the wireless link. WMM QoS provides prioritization of
wireless data packets from different applications based on four access categories: voice, video,
best effort, and background. For an application to receive the benefits of WMM QoS, both it and
the client running that application must be WMM enabled. Legacy applications that do not support
WMM, and applications that do not require QoS, are assigned to the best effort category, which
receives a lower priority than voice and video.
You can give prioritized Internet access to the following types of traffic:
•
For specific applications
• For specific online games
• On individual Ethernet LAN ports of the router
• From a specific device by MAC address
Configuring QoS for Internet Access
To specify prioritization of traffic, you must create a policy for the type of traffic and add the
policy to the QoS Policy table in the QoS Setup screen.
To create a QoS policy: