Nikon UPS - Manual (Page 25)

UPS/400
. . . an IBM AS/400 UPS power monitoring system . . .
25
S
YSTEM
S
ETUP
This menu allows setting of values that are global in nature to the operations of UPS/400. This includes
information specific to your type of UPS, as well as requirements for system power down. For this section,
you will need to acquire some of this information from you UPS documentation or your supplier.
UPS BATTERY SPECIFICATIONS:
• Battery life: The number of minutes your UPS can sustain your system in the event of a power
outage
• Recharge rate: The number of minutes recharging time required to yield one minute of usable
UPS battery time
ALTERNATIVE SUBSYSTEM SPECIFICATIONS:
• Subsystem description: Valid AS/400 object name you wish to assign to alternative
subsystems
• Library: Library name where UPS/400 will create the alternate subsystem description
• Work stations 1 – 5: Work station name entries assigned to alternate subsystems
Note: This portion of the System Setup (Alternative Subsystem Specifications) is optional. The alternate
subsystem defined here will be automatically started immediately after all other interactive subsystems are
ended in the power down process (i.e., *INT step you scheduled in the System Attributes menu). The
library names above should already exit, but the subsystem description will be created by UPS/400.