Nikon WT-1 - Manual (Page 36)

29
Confi guring the Wireless LAN Adapter
The minimum information needed to confi gure a wireless LAN adapter is
listed below. Contact the manufacturer for details.
SS-ID 1 D2H
Wireless mode 802.11b
“Any” connection 2 Disabled
Encryption (WEP) Off
IP address 3 Obtain IP address automatically: Off
IP address: 192.168.1.1
Subnet mask: 255.255.255.000
Channel Any
DNS 000.000.000.000
Default gateway 000.000.000.000
MAC address 4 Unspecifi ed
1 Same SS-ID must be assigned to WT-1.
2 Not required if adapter does support “any” connection.
3 In this example, it is assumed that network uses class C private IP addresses and
subnet masks. Be sure that IP address is not same as that assigned to ftp server or
WT-1. For example, if ftp server is 192.168.1.3, wireless LAN adapter can be assigned
192.168.1.1, and WT-1 can be assigned 192.168.1.2. All addresses must be in same
class.
4 If MAC address is required, enter MAC address for WT-1 ( 21).