Nikon LS4000 - Manual (Page 154)

144
Specifications
Scanner Specifications
SUPER COOLSCAN 4000 ED (LS-4000 ED)
Film • 35 mm film: Positive and negative film, both color and
monochrome, may be used. Film may be
scanned in strips of up to six frames (rolls of
up to forty frames can be scanned using the
optional SA-30 film-roll adapter) or mounted
as 35 mm slides using mounts of from 1.0–
3.2 mm in thickness and 49.0–50.8 mm in
width (up to fifty slides can be automatically
scanned in sequence using the optional SF-
200 (S) slide feeder).
• APS (IX240) film: APS film cartridges can be scanned with the
optional IA-20 (S) adapter for APS (IX240) film.
• Prepared slides: Prepared slides can be scanned using the op-
tional FH-G1 slide holder for the MA-20 (S).
Aperture 25.1
×
36.8 mm when scanning 35 mm film in the MA-20 (S) ,
FH-3 (S) or SF-200 (S)
25.1
×
38.0 mm when scanning 35 mm film in the SA-21 or SA-30
18.6
×
28.4 mm when scanning APS (IX240) film
Scan range 3946
×
5782 pixels when scanning 35 mm film in the MA-20 (S),
FH-3 (S) or SF-200 (S)
3946
×
5959 pixels when scanning 35 mm film in the SA-21 or
SA-30
2916
×
4453 pixels when scanning APS (IX240) film
Effective aperture 23.3
×
36.0 mm when scanning 35 mm film in the SA-21 or SA-30
24.0
×
36.0 mm when scanning 35 mm film in the FH-3 (S)
25.1
×
36.8 mm when scanning 35 mm film in the MA-20 (S) or
SF-200 (S)
16.1
×
26.9 mm when scanning APS (IX240) film
Effective scan range 3529
×
5379 pixels when scanning 35 mm film in the SF-200 (S)
3546
×
5782 pixels when scanning 35 mm film in the MA-20 (S)
3654
×
5646 pixels when scanning 35 mm film in the SA-21 or
SA-30
3762
×
5646 pixels when scanning 35 mm film in the FH-3 (S)
2525
×
4219 pixels when scanning APS (IX240) film
Scanning system Fixed-film, movable-plane single-pass optical scanning system
Light source Red, green, and blue (RGB) LEDs
Sensor 3964-pixel, linear CCD image sensor
Color separation Performed by RGB color LEDs
Optical resolution Maximum 4000 pixels per inch