Nikon D300 - Manual (Page 237)

211
I
❚❚Shooting Data Page 1
1
1 Displayed only if [Data] is selected for [Display mode] (pg. 250).
2 Displayed in red if photo was taken with ISO sensitivity auto control on.
3 Displayed if Custom Setting b6 ([Fine tune optimal exposure], pg. 277) has
been set to a value other than zero for any metering method.
4 Displayed only if VR lens is attached.
100--1 NIKON D300
MTR, SPD, AP.
EXP. MODE, I SO
, EXP. TUNI NG
FOCAL LENGTH
LENS
AF / VR
FLASH MODE,
CMD
: M : TTL, +3. 0
B : OFF
: , 1 / 8000, F4. 8
: , 200
: +1. 3, +5 / 6
: 35mm
: 18–200
/
3. 5–5.6
: S / VR–On
: Built – i n, TTL, +1. 3
SLOW
A : TTL, +3. 0
C : OFF
3
4
5
6
7
8
9
10
11 12
1 2
1 Protect status............................. 221
2 Retouch indicator..................... 329
3 Metering method..................... 100
Shutter speed ................... 106, 109
Aperture ............................. 107, 109
4 Exposure mode......................... 102
ISO sensitivity 2 .............................94
5 Exposure compensation........ 114
Optimal exposure tuning 3 .... 277
6 Focal length................................ 356
7 Lens data..................................... 196
8 Focus mode .................................. 62
Lens VR
(vibration reduction)
4 ............... 35
9 Flash mode..................................171
Flash compensation.................176
10 Commander mode/group
name/flash control mode/flash
compensation ............................293
11 Camera name
12 Folder number–
frame number ............................258