Nikon D300 - Manual (Page 317)

291
U
e3: Flash Cntrl for Built-in Flash
Choose the flash mode for the built-in flash.
A
“Manual” and “Repeating Flash”
Y icons blink in the control panel and viewfinder when these options are
selected.
A
The SB-400
When an optional SB-400 flash unit is attached
and turned on, Custom Setting e3 changes to
[Optional flash], allowing the flash control mode
for the SB-400 to be selected from [TTL] and
[Manual] ([Repeating flash] and [Commander
mode] options are not available).
Option Description
1
TTL
(default) Flash output is adjusted automatically in response to
shooting conditions.
2 Manual Choose the flash level (pg. 292).
3
Repeating
flash The flash fires repeatedly while the shutter is open,
producing a strobe-light effect (pg. 292).
4
Commander
mode Use the built-in flash as a master flash controlling
one or more remote optional flash units (pg. 293).