Nikon NP64 - Manual (Page 51)

42
5. Using the Viewer (NP64/NP54)
5. Press the ▶ button.
The next image will be displayed.
6. Press the ◀ button.
The previous image will be displayed.
7. Press the MENU button.
The control bar will be displayed.
• Pressing the MENU button during display of the control
bar will display the SOURCE SELECT screen. Press
the MENU button again to close the SOURCE SELECT
screen.
• Pressing the EXIT button during display of the control
bar will close the control bar.
8. Press the ▶ button to select [ ] and press the EN-
TER button. The selected image will be rotated 90
degrees clockwise.
• From this state, each time the ENTER button is pressed,
the image will be rotated by 90 degrees clockwise.
9. Press the ▶ button to select [ ] and press the EN-
TER button.
The control bar will be closed.
10. Press the EXIT button.
The thumbnail screen will be displayed.
• Another way to display the thumbnail screen is to go
back to Step 7 and select [ ] of the control bar and
press the ENTER button.
• To return the slide screen from the thumbnail screen,
select the image you wish to display in slide and press
the ENTER button.
Removing the USB memory from the projector
1. Press the MENU button with the thumbnail screen
displayed.
The pop-up menu will be displayed at the bottom left of
the screen.
• Pressing the MENU button during display of the pop-up
menu will display the on-screen menu. Press the MENU
button again to close the on-screen menu.
2. Select [REMOVE USB DEVICE] and press the ENTER
button.
• The confirmation message will be displayed at the cen-
ter.