Figure 3-1, Figure 3-2, Procedure 3-1 – Nikon MOTORMESH 4300 User Manual

Page 32: Configuring a 4300 device mesh -2

Advertising
background image

Chapter 3: Device Configuration

July 2007

3-2

Procedure 3-1 Configuring a 4300 Device Mesh

1

Ensure that all the 4300 devices are wire-connected to the MOTOMESH 2.0 MiSC. NOTE: It is
recommended that the 4300 devices are set-up on the bench prior to actual deployment in the field.

2

The MOTOMESH 2.0 MeshManager element management application must be installed and running.

3

From within MeshManager select the

Add MotoMesh Duo Device icon from the Toolbar menu, or

select File | Add MotoMesh Duo Device from the application menu.

4

The Add New MOTOMESH Duo Device panel will now be shown in MeshManager.

Figure 3-1

The Add New MOTOMESH Duo Device Panel in MeshManager

5

Enter the 4300 Device’s 802.11 Ethernet MAC address, from the external device’s label, into the 802.11
AP Ethernet
entry field.

Figure 3-2

Entering the 802.11 AP Ethernet MAC Address in MeshManager

Advertising