8) connecting the supplied power cable, Onnecting the, Upplied – Nikon NP4100 User Manual
Page 52: Ower, Able, Connecting the supplied power cable
Advertising
2. Installation and Connections
37
Connecting the Supplied Power Cable
Refer to the following guidelines to connect the power supply to the projector.
1. Locate the projector correctly. See Selecting a Location on page
2. Ensure Main Power switch is in the off position (O).
3. Connect power cable to mains outlet.
4. Connect power cable to power inlet (AC IN) on the projector, see Terminal
Note:
Make sure that the prongs are fully inserted into both the AC IN and the wall
outlet.
Note:
Ensure that the cables do not create a trip hazard.
Advertising