Network Technologies T15-RS16 - Manual

1
INSTALLATION GUIDE FOR THE
ENVIROMUX-ACVD-xxx
AC Voltage Detector
INTRODUCTION
The NTI ENVIROMUX-ACVD-xxx detects voltage (70-250VAC) when connected to an ENVIROMUX-SEMS-16 or ENVIROMUX-
MINI. A 2-wire sensor cable (6 foot cable included), is used to connect to an ENVIROMUX, which can be configured to send
alerts based on the presence or lack of AC voltage.
Models available:
ENVIROMUX-ACVD-515 – For use with ENVIROMUX-SEMS-16
ENVIROMUX-ACVD-515M – For use with ENVIROMUX-MINI (SEE NOTE BELOW)
ENVIROMUX-ACVD-C14 – For use with ENVIROMUX-SEMS-16 but with universal 250V IEC C14 socket
ENVIROMUX-ACVD-C14M – For use with ENVIROMUX-MINI but with universal 250V IEC C14 socket
Note: The ENVIROMUX-ACVD-515M and ENVIROMUX-ACVD-C14M are only compatible with ENVIROMUX-MINI units
made on or after 11/1/07 (see label on the bottom of your ENVIROMUX-MINI). If your ENVIROMUX-MINI was made prior
to 11/1/07, please order model ENVIROMUX-ACVD-515 or ENVIROMUX-ACVD-C14. Failure to use the correct voltage
detector will result in inaccurate alert reports.
Features:
¾ Monitors the presence of 70-250VAC
¾ 2-position screw-terminal connection
¾ Supports 2-wire sensor cable up to 1000 ft
1
(6 foot cable included)
¾ RoHS and CE certified
MATERIALS SUPPLIED
¾ ENVIROMUX-ACVD-xxx Power Monitor (xxx= 515,515M,C14, or C14M)
¾ ENVIROMUX-2W-6 (6 foot 2-wire sensor cable)
¾ Installation
Guide
INSTALLATION
Place the ENVIROMUX-ACVD-xxx where it can be plugged into an AC power source (70-250VAC). Connect a 2-wire cable
between the terminals on the ENIVROMUX-ACVD-xxx and the “CONTACTS” terminals on the ENVIROMUX-MINI, or the
“DIGITAL IN” terminals on the ENVIROMUX-SEMS-16
2
.
Use the chart below or see images on next page to make proper wire connections:
TERMINAL ON
ENVIROMUX-ACVD-515 Wire
Color TERMINAL ON
ENVIROMUX-MINI
TERMINAL ON
ENVIROMUX-SEMS-16
+ White +5V +
Black
3
1
When using 2-wire cables longer than 100 ft, be careful to route cables away from AC wiring, lighting sources, electric motors, or
other electrical devices.
2
The wire connection terminal blocks are easily removed from the ENVIROMUX-ACVD-xxx, ENVIROMUX-MINI, and
ENVIROMUX-SEMS-16 for more convenient wire termination.
3
In the event that the ground terminal is unavailable, the negative terminal ( ) has the same potential and can be substituted.