Roland Ronald Wireless DP90S User Manual

About the wireless lan function, What is wireless lan function, Basic connection method (connect by wps)

Advertising
background image

1

About the Wireless LAN Function

Check the version

The wireless LAN function was added in DP90S/DP90

version 2.00. If the version is earlier than 2.00, download the

update from the support page (http://www.roland.com/

support/) g Downloads g product name (DP90S/DP90)
g

DP90S/DP90 System Program Version 2.00, and update

your DP90S/DP90.

* If this supplementary manual was included with a new

DP90S/DP90 you purchased, your instrument has already

been updated to version 2.00 or later; you do not need to

update.

How to check the version

Hold down the [–] and [+] button and turn ON the

DP90S/DP90.

What is Wireless LAN Function?

By inserting the wireless USB Adapter (WNA1100-RL; sold separately)

into the DP90S/DP90’s USB MEMORY port, you’ll be able to use

wireless-compatible applications (such as the “Piano Partner” iPad

app).

DP90S/DP90

Wireless USB Adapter (sold

separately: WNA1100-RL)

Wireless LAN access point

(e.g., wireless LAN router)

Wireless LAN

Wireless LAN

iPad etc.

Items required to use the wireless LAN function

‰

Wireless USB Adapter (sold separately: WNA1100-RL)

‰

Wireless LAN access point (e.g., wireless LAN router) *1 *2 *3

‰

iPad etc.

*1 The wireless LAN access point you use must support WPS. If your

wireless LAN access point does not support WPS, you can connect

using the procedure described in “Connecting to a Wireless LAN

Access Point That You Select (Select AP)” (p. 2).

*2 The ability to connect with all kinds of wireless LAN access points

is not guaranteed.

*3 If you’re unable to connect to the wireless LAN access point, try

connecting using Ad-Hoc mode (p. 3).

Basic Connection Method (Connect by

WPS)

The first time you connect the DP90S/DP90 to a wireless network,

you’ll need to perform the following procedure (WPS) to join the

wireless network.
This procedure is required only the first time. (Once you’ve joined the

network, this procedure will no longer be necessary.)

What is WPS?

This is a standard that makes it easy to make security settings

when connecting to a wireless LAN access point. We recommend

that you use WPS when connecting to a wireless LAN access point.

1.

Insert the wireless USB Adapter (WNA1100-RL; sold

separately) into the DP90S/DP90’s USB MEMORY port.

2.

While holding down the [Key Touch] button, press the

[Transpose] button.

3.

Press the [

] [

] (Slow/Fast) buttons to select the

“Wireless,” then press the [Song] button.

4.

Press the [

] [

] (Slow/Fast) buttons to select the

“Connect,” then press the [Song] button.

5.

Press the [

] [

] (Slow/Fast) buttons to select the “WPS,”

then press the [Song] button.

“Proceed?” will appear.

6.

Perform the WPS operation on your wireless LAN access

point (e.g., press the WPS button on your wireless LAN

access point).

For details on WPS operation of your wireless LAN access point, refer

to the documentation for your wireless LAN access point.

7.

Press the [

] (Fast) button of the DP90S/DP90.

Once successfully connected, “Success” will appear.

* If you fail to connect, refer to “Troubleshooting” (p. 4).

8.

Press the [Key Touch] or [Transpose] button to exit

Function mode.

NOTE

* The device (e.g., iPad) running the app must be connected to the

same network.

MEMO

• The connection data is stored in memory when you perform

the WPS procedure; the device will automatically connect to the

wireless network the next time.

• All connection data will be erased if you perform a factory reset.

This completes the procedure necessary for joining

the wireless network. You can use the wireless

connection from an iPad app such as Piano Partner.

DP90S/DP90

Advertising