Raymarine CAM100 User Manual

Cam 100, User guide, Installation

Advertising
background image

Cr

op

Cro

Cro

Cro

Cro
p

Cro

Cro

Cr

op

Fo

l

Fo

l

Fo

l

Fo

l

Document number: 81272_1 Date: November 2005

User Guide

Installation

The adapter cable should be used to connect the display and the power supply to
the camera. The adapter cable connections are shown below

.

If you do not have a breaker in the power circuit, an in-line 0.5 A quick blow fuse
should be fitted to the positive (red) lead of the cable.

Maintenance and Troubleshooting

Your Raymarine CAM 100 does not contain user-serviceable parts.
They should be serviced only by authorized Raymarine service
technicians at a Raymarine factory facility.

Routine Maintenance
Routine maintenance should be carried out on a regular basis:

Examine all cables for signs of damage such as chafing, cuts or nicks.

Check that all cables are securely connected.

Spray the camera and lens with fresh water and wipe with a soft lint-free
cloth to remove debris or salt deposits.

Troubleshooting

EMC conformance

All Raymarine equipment and accessories are designed to the best industry
standards for use in the recreational marine environment. The design and
manufacture of Raymarine equipment and accessories conforms to the
appropriate Electromagnetic Compatibility (EMC) standards, but correct
installation is required to ensure that performance is not compromis

ed.

Problem

Solution

Camera does not function

1. Make sure that the cable is sound and

that all connections are tight and free

from corrosion.

2. Check system fuses.
3. Check that the display is set up

correctly to receive the images.
Refer to the relevant display
handbook for full details.

Red +12 V

Black - 0 V

Video connector

D8537_1

CAM 100

Technical specification

Technical support

Format

PAL 752 x 582 pixels
NTSC 768 x 494 pixels

Imager

1/3 Sony Super HAD CCD (Super Hi resolution)

Horizontal resolution

550 TVL

Scanning system

PAL 625 lines
NTSC 525 lines 2:1 interlaced

Video output

Composite 75 Ohms

Infra red

14 IR LEDs

LED spectrum

30 degrees for 15m

Minimum illumination

0.1 Lux at F2 - no IR, 0 Lux - with IR

Waterproof

IPX6 and CFR46

Power connection

12 V tinned leads

Video connections

Male BNC

Operating temperatures

-10

o

C to +55

o

C (-14

o

F to 130

o

F)

Power consumption

130 mA - day, 280 mA - night, IR on @12 V DC

North and South America

Raymarine Technical Support
1-800-539-5539
or, +1 603-881-5200

Product Repair and Service
Raymarine Product Repair Center
21 Manchester Street,
Merrimack, NH
03054-4801
USA

Europe, Middle East, Africa
and Australasia

Raymarine Technical Support
+44 (0) 23 9271 4713

Product Repair and Service
Raymarine plc
Anchorage Park
Portsmouth
PO3 5TD
England

Help us to help you
To allow us to respond to your needs faster, please quote the Equipment
type, Model number and Serial number when requesting service

Complete product information and interactive help is available at:

www.raymarine.com

D8538 1

Technical Support

D8531_1

Advertising