Rio Audio Karma MP3 User Manual
Rio karma, User’s guide
Advertising
Table of contents
Document Outline
- Rio Karma
- User’s Guide
- Package Contents
- Copyright/Trademarks
- Table of Contents
- Chapter 1 Getting Started
- Chapter 2 Connections
- Chapter 3 Software Setup
- Chapter 4 Basic Operations
- :: Basic Operations
- :: Copy
- :: Transfer
- Rio Music Manager
- 1 Launch the Rio Music Manager.
- 2 Click My Music in the left frame to access tracks. Rio Music Manager will scan the computer’s hard drives for digital audio tr...
- 3 Select tracks within a category. Categories include Albums, Artists, Genres, Songs, and Playlists. For example, if you wish to...
- 4 Use any of the following techniques to select tracks:
- 5 After the tracks have been selected they can be transferred to the Rio Karma by clicking .
- 1 Launch the Rio Music Manager.
- Rio Music Manager
- :: Control
- :: Play
- :: Artist
- :: Album
- :: Track
- :: Playlist
- :: Rio DJ
- :: Genre
- :: Year
- Chapter 5 Advanced Features
- :: Advanced Features
- :: Equalizer
- :: Organize
- 1 Press MENU.
- 1 Select Create.
- 2 Name the playlist.
- 3 Select DONE using the index list or press RIOSTICK.
- 4 Select tracks using Artist, Album, Genre, Year or Track methods. Press MENU to navigate up to change track selection methods if desired.
- 5 When done, press MENU to navigate out of the Create menu and confirm that you want to save the newly created playlist.
- :: Bookmarks
- :: Settings
- :: Features
- :: About Track
- :: About Rio Karma
- Chapter 6 Help
- :: Troubleshooting
- Customer Service Information
- Frequently Asked Questions
- 1 Reset the player by inserting a pin or needle into the RESET HOLE next to the DC IN port.
- 1 Reset the player by inserting a pin or needle into the RESET HOLE next to the DC IN port.
- 1 Connect the Rio Karma to the computer using the USB cable.
- 1 Click the following link: www.rioaudio.com/support
- 1 Connect the player to your computer with the USB cable.
- 1 Click Start on the Windows desktop.
- 2 Click Settings.
- 3 Click Control Panel.
- 4 Double-click the Network icon.
- 5 Click the TCP/IP component installed for your Ethernet card.
- 6 Click Properties.
- 7 Click Specify an IP address on the IP Address tab.
- 8 Type 192.168.0.x (where x is a number between 2 and 254) in the IP Address field. The new IP address should not be used by any other computers on your network. If you are using Windows Me, uncheck the Detach connection to network media box.
- 9 Type 255.255.255.0 in the Subnet Mask field.
- 10 Click OK.
- 11 Click OK.
- 12 Click Yes when prompted to restart your computer.
- 1 Click Start on the Windows desktop.
- 2 Click Settings.
- 3 Click Control Panel.
- 4 Click the Network Connections Control Panel icon.
- 5 Double-click Local Area Connection.
- 6 Click Properties.
- 7 Double-click Internet Protocol (TCP/IP).
- 8 Click Use the following IP address:.
- 9 Type 192.168.0.x (where x is a number between 2 and 254) in the IP Address field. The new IP address should not be used by any other computers on your network.
- 10 Type 255.255.255.0 in the Subnet Mask field.
- 11 Click OK.
- 12 Click OK.
- 13 Click Yes if prompted to restart your computer.
- 1 Click Start on the Windows desktop.
- 2 Click Control Panel.
- 3 Click Network and Internet Connections.
- 4 Click the Network Connections Control Panel icon.
- 5 Double-click Local Area Connection.
- 6 Click Properties.
- 7 Double-click Internet Protocol (TCP/IP).
- 8 Click Use the following IP address:.
- 9 Type 192.168.0.x (where x is a number between 2 and 254) in the IP Address field. The new IP address should not be used by any other computers on your network.
- 10 Type 255.255.255.0 in the Subnet Mask field.
- 11 Click OK.
- 12 Click OK.
- 13 Click Yes if prompted to restart your computer.
- :: Glossary of Digital Audio Terms
- :: Limited Warranty and Software License
- :: FCC and Industry Canada Compliance
- :: Safety
- :: Troubleshooting
- Index