RSA Lighting Indoor Furnishings - Manual

DESCRIPTION Catalog # Type
Project
Comments Date
Prepared by
SPECIFICATION FEATURES
www.cooperlighting.com
Thermal
Protector
Separate Wiring
Compartment
18” flexible conduit 24” flexible conduit
3.88”
7.75”
9.25” 9.25”
8.58”
7.75”
6.25”
12.54”
3.88”
1.60”
6.50”
6.88”
6.50”
6.88”
5.75”
Required
above
ceiling
Integral Electronic Metal
Halide Ballasts
45º x 45º
Adjust
Double
Gimbal
A ... Housing
Housing and junction box are aluminum,
trim assembly is steel with powder coated
finish. Fixture utilizes a removable trim
sleeve to provide a 0.75” flange around
the ceiling opening and to help conceal
the inner hardware of the fixture from sight
below the ceiling. Can accommodate
various ceiling thickness.
B ... System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.
C ... Junction Box
Junction Box is UL listed for through branch
wiring, 6 #12 90º C supply conductors or
60º C for end of run. The fixture is also UL
listed as ‘access above ceiling not required’.
D ... Electrical
Integral electronic metal halide ballasts are
mounted in a separate metal enclosure
box attached to the junction box with
18” of flexible conduit. Ballast enclosure
includes a separated wiring compartment
and two knockouts for conduit entry and
features a perforated metal door for easy
maintenance access and cooler operation.
Entire electrical assembly (jbox and ballast
enclosure) is removable from the housing
for easy maintenance.
E ... Lamps
Four (4) MR16 Metal Halide lamps
mounted in adjustable double gimbal.
Lamp holders are removable and may be
regressed 1” for additional cut-off. Lamps
can accept up to three optical acces-
sories (i.e. lens + hex louver + snoot).
45º x 45º locking lamp adjustment.
Beveled-edge lamp ring is secured with
threadless, bayonet action. Optional
retractable arm is available for lamp
pulldown and extreme aiming. Includes
GX10 TAL sockets.
F ... Mounting
Mounting clips are provided which
mount the housing edge flush with the
finished ceiling line. Mounting clips are
secured to the housing with screws.
G ... Labels
cULus listed for non-type IC
applications, suitable for use in damp
locations.
Ceiling Cut-Out: 8.84” x 8.84”
COMBOLIGHT
®
Next Generation
Recessed
Multi-Lamp Fixture
Four (4) Light Square
MR16 Metal Halide
Remodel Housing
w/ 0.75” Trim Flange
ORDERING INFORMATION
An adjustable Multi-lamp Recessed fixture with a 0.75” trim flange suitable for
downlighting and accent applications. Utilizes FOUR (4) MR16 Metal Halide
lamps in a 2x2 square configuration.
For remodel applications. Insulation must be kept 3” from all sides and at least
1” above the housing.
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031
rev 121107
For use with GE 20W or 39W CMH MR16
or ES16MH lamps.
Configuration
CX
= COMBOLIGHT
Recessed Four (4) Light
Square
Housing
R
= Remodel
CX R E T
Lamp Type / Wattage Label
020C16
= 20 Watt MR16 Metal Halide
039C16 = 39 Watt MR16 Metal Halide
Power Supply
E
= Electronic Metal Halide
Ballast
Power Supply
Voltage
1
= 120V
2 = 277V
Lamp Mechanism
G
= Double Gimbal
R = Retractable Double Gimbal
Trim Finish
W
= White
B = Black
S = Industrial Silver
Trim Flange
T
= 0.75” Trim Flange
Housing Interior/Electrical Door/Sleeve
Finish
W
= White
B = Black
S = Industrial Silver