Ryobi HP24 - Manual

THANK YOU FOR BUYING A RYOBI SCREWDRIVER.
Your new screwdriver has been engineered and manufactured to Ryobi’s high standard for dependability, ease of operation,
and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.
CAUTION:
Carefully read through this entire operator’s manual before using your new screwdriver.
Pay close attention to the Rules for Safe Operation, Warnings, and Cautions. If you use your screwdriver properly and only
for what it is intended, you will enjoy years of safe, reliable service.
Thank you again for buying Ryobi products.
OPERATOR'S MANUAL
2.4 VOLT SCREWDRIVER
Model HP24
SAVE THIS MANUAL FOR FUTURE REFERENCE
SPECIFICATIONS:
Collet 1/4 in. (6.4 mm)
Motor 2.4 Volt DC
Switch Single Speed / Reversible
No Load Speed 150 RPM
Maximum Torque 35 lb.- in.
Charger Rating 120 Volts, 60 Hz, AC only
Charger Voltage 2.4 Volt
Charger Rate 3-6 Hours
1414
16 16
18 18
20 20