Rolls Cable Detective Cable Tester CT 1 User Manual

Ct 1, Cable detective, Owners manual

Advertising
background image

LED 1/GND: Indicates continuity be-

tween pins 1 of an XLR cable or MIDI

cable, or ground on an RCA or 1/4"

cable.

LED 2/TIP: Indicates continuity between

pins 2 of an XLR cable, or the tip on an

RCA or 1/4" cable.

LED 3/RING: Indicates continuity be-

tween pins 3 of an XLR cable or MIDI

cable, or the ring of a 1/4" cable.

OPERATION

Insert one end of the cable to be tested

on the left side of the line, located in the

middle of the CT

1, and the other

side of the cable

on the right side

of the line. See

example here.

CT 1

CABLE DETECTIVE

Cable Tester

Owners Manual

SLC, Utah

10/01

CT 1 CABLE DE-

TECTIVE

• Tests 1/4", RCA, XLR and MIDI

cables

• Tests combinations of the above

• Easy-to-read LED indication

Any musician or sound person knows how

difficult it is to maintain cables. The CT 1

provides an efficient way to detect shorted

or open cables. The unit tests 1/4" TS,

1/4" TRS, RCA, and XLR cables. It tests

MIDI cables, plus, it will test combinations

of the above.

1

22-Apr-1999

Document Number:

Date:

Sheet

of

Ba

� �

� �

� �

�� � �

� �

� �

� �

� �

� �

� �

� �

� �

� �

� �

� �

� �

� �

� �

� �

� �

� �

� �

� �

� �

�� � �

� � �

� �

� �

� �

� �� �

� � �

�� � �

� � � �

� � �

� �

� �

� �

� �

� �

� �

� �

� �

� �

� �

� �

� �

� �

� �

� �

� �

� �

� �

� �

� �

� �

� �

� �

� �

� �

� �

� �

� �

� �

� �

� �

� �

� �

� �

� �

1

2

3

� �

� �

� �

� �

��

� �

�� �

� �

� �

� �

� �

� � �

� �

1

2

3

� �

� �

� �

� �

��

� �

�� �

� �

� �

� �

� �

� � �

� �

1

3

4

2

5 � �

� �

� �

1

3

4

2

5

� �

� �

� �

1

2

3

� �

� �

� �

� �

� �

� �

1

2

3

� �

� �

� �

� �

� �

� �

� �

� �

� �

� �

�� � � �

� �

� �

� �

� �

� �

� �

� �

� �

� �

� �

� �

� �

� �

� �

� �

� �

� �

� �

� �

� �

� �

� �

� � �

� �

� �

� �

� �

� � �

� �

� �

� � � � � � � � � � � � � � � � �

� � � � � � � � � � � � � � � � � � � � � �

� � � � � � � � � � � � � � � � � � � � � � � � �

INTRODUCTION

Thank you for your purchase of the CT

1 CABLE DETECTIVE cable tester. This

unit was designed with the working musi-

cian and sound person in mind. Read the

following manual carefully to ensure proper

operation and a full understanding of all the

CT 1 functions. The unit tests for: opens,

shorts, intermittents, and crossed wires

WARRANTY

For information on the Rolls One Year Lim-

ited Warranty, and to register this product,

visit our website at www.rolls.com

DESCRIPTION

The CT 1 consists of two RCA jacks, two

1/4" jacks, two female XLR, two male XLR

jacks, and two MIDI jacks.

To test RCA and 1/4" TS cables, plug each end of the cable into the proper jack and

wiggle the cable around at different points on the cable. Watch the 1 and 2 LEDs, if

either LED is off, or goes on and off - the cable is bad.
The testing procedure for 1/4" TRS (stereo) and XLR cables is identical to the above,

except watch the 1, 2 and 3 LEDs. Adapter type cables, such as 1/4" to XLR cables,

may also be tested by plugging each end into it's proper jack on either side of the line.

Test as indicated above.
To test a MIDI cable, plug each end

of the cable into the MIDI jacks and

test as described above. Watch the

1 and 2 LEDs, if either LED is off, or

goes on and off - the cable is bad.
NOTE: WHEN TESTING A 1/4"

MONO TO RCA CABLE, CON-

NECT THE 1/4" PLUG TO THE

LEFT 1/4" JACK AND THE RCA

TO THE RIGHT RCA JACK. DUE

TO A PARTICULAR CIRCUIT

CONSIDERATION, TESTING VICE

VERSA (WITH THE 1/4" ON THE

RIGHT AND THE RCA ON THE

LEFT) WILL BE INACCURATE.
TEST INDICATORS
NO LEDS = BAD CORD OR DEAD

BATTERY
1 LED = SHORTED WIRES
2 LEDS = RCA, MIDI OR MONO

CORD GOOD, OR CROSSED

WIRES IN STEREO & XLR CORDS
3 LED = GOOD STEREO 1/4" TRS,

OR XLR CORD

Advertising