RocketFish RF-BSLAC - Manual (Page 12)

12
Why does the adapter not power my laptop when the
battery is completely discharged or when there is no
battery inside of the laptop?
Because this adapter is designed with a standby power saving feature, it
will not function correctly when the battery is completely discharged or
if there is not a battery inside of the computer.
Why does my laptop boot into recovery mode after
resuming from “Standby” or “Hybrid Sleep (Vista only)”
mode?
Your laptop battery may not be able to hold a charge for more than a
few minutes or you may have removed the battery from your laptop.
The standby power saving feature of this adapter turns on when power
is not needed and it needs to work in conjunction with the battery
during “Standby” or “Hybrid Sleep” (Vista only) mode. If you want to
disable the energy saving feature of the adapter you can plug any USB
cable into the USB port on the adapter.
How do I turn off the energy saving feature of this adapter?
If you want to disable the energy saving feature of the adapter, you can
plug any USB cable into the USB port on the adapter.
Specifications
AC wall socket input cable 68"
DC power output cable 46"
AC input voltage 100~240V AC, 50-60 Hz~ 2.5A
DC output voltage 16/19 Volts DC (depending on tip)
Output current 5.0 Amps maximum continuous
(depending on the tip)
USB output voltage 5.1V
USB output current 2.1 Amps maximum
Output power 90 W maximum (AC)
Weight 10.58 oz. (300 g)
Dimensions (L × W × H) 5.3 Ч 2.1 Ч 1.2 inches
(134.67 Ч 52.59 Ч 30.77 mm)