Setting the pc – Samsung LE32R8 User Manual

Page 40

Advertising
background image

english - 3

Setting the PC

Coarse and Fine tuning of the Image (Image lock):

the purpose of picture quality adjustment is to remove or

reduce picture noise.

If the noise is not removed by Fine-tuning alone, then adjust

the frequency as best as possible (coarse) and Fine-tune

again.

after the noise has been reduced, re-adjust the picture so that

it is aligned on the center of screen.
1.
Preset: Press the SourCe button to select PC mode.
. Press the menu button to display the menu.

Press the ▲ or ▼ button to select "Setup", then press the

enter/oK button.

3. Press the ▲ or ▼ button to select "PC", then press the enter/oK button.
. Press the enter/oK button to select "Image Lock".
. Press the ▲ or ▼ button to select "Coarse" or "Fine", then press the enter/oK button.
. Press the ◄ or ► button to adjust the screen quality.

Press the

enter/oK button.

. Press the exIt button to exit.

Changing the Image Position:

adjust the PC’s screen positioning if it does not fit the tV

screen.
1.
Follow the "Coarse and Fine Tuning of the Image

(Image Lock)"

instructions number 1 to 3.

. Press the ▲ or ▼ button to select "Position", then press the

enter/oK button.

3. Press the ▲ or ▼ button to adjusting the Vertical-Position.

Press the ◄ or ► button to adjust the Horizontal-Position.

Press the

enter/oK button.

. Press the exIt button to exit.

adjusting the PC Screen automatically (auto adjustment):

auto adjustment allows the PC screen of set to self-adjust to

the incoming PC video signal. the values of fine, coarse and

position are adjusted automatically.
1.
Follow the "Coarse and Fine Tuning of the Image

(Image Lock)" instructions number 1 to 3.

. Press the ▲ or ▼ button to select "Auto Adjustment", then

press the

enter/oK button.

3. Press the exIt button to exit.

Initializing the Image Settings (Image reset):

You can replace all image settings with the factory default

values.
1.
Follow the "Coarse and Fine Tuning of the Image

(Image Lock)" instructions number 1 to 3.

. Press the ▲ or ▼ button to select "Image Reset", then press

the

enter/oK button.

3. Press the exIt button to exit.

tV

PC

Image lock

Position

auto adjustment

Image reset

move

enter

return

tV

PC

Image lock

Position

auto adjustment

Image reset

move

enter

return

tV

Position

move

enter

return

mode

: Custom

equalizer

SrS tS xt

: off

auto Volume

: off

Internal mute

: off

reset

move

enter

return

tV

Image lock

Coarse

0

Fine

0

move

enter

return

BN68-01166A-00Eng-0307.indd 38

2007-03-07 �� 8:06:48

Advertising
This manual is related to the following products: