Ryobi HD501 - Manual

OPERATOR'S MANUAL
HD501 - 1/2 in. (13 mm) Hammer Drill
DOUBLE INSULATED
SAVE THIS MANUAL FOR FUTURE REFERENCE
THANK YOU FOR BUYING A RYOBI HAMMER DRILL.
Your new hammer drill has been engineered and manufactured to Ryobi's high standard for dependability, ease of operation,
and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.
CAUTION: Carefully read through this entire operator's manual before using your new hammer drill.
Pay close attention to the Rules for Safe Operation, Warnings, and Cautions. If you use your hammer drill properly and only
for what it is intended, you will enjoy years of safe, reliable service.
Please fill out and return the Warranty Registration Card so we can be of future service to you.
Thank you again for buying Ryobi tools.
SPECIFICATIONS:
Chuck Capacity 1/16 in. (1.5 mm) - 1/2 in. (13 mm)
Rating 120 volts, 60Hz, AC only, 5.5 Amperes
No Load Speed 0 - 1,000 & 0 - 3,000 RPM
Hammer Speed 0 - 48,000 BPM
Switch Adjustable Variable Speed/Reversible