Roland ColorChoice Ver. 4.5 - Manual (Page 16)

To quit the RIP Software program on Windows, right click on the icon displayed at the lower right corner of
your screen, and then select Exit from the pop-up menu. Once you quit in this fashion, you must either restart
your computer or use the ‘Start’ menu in order to restart the RIP Software.
Printing a Test File
To insure that your software is properly installed and that a connection to the printer is established, we
recommend that you create a test print. When you do this a small test file is sent to the Print Monitor and then
printed. Once you’ve successfully printed a test file, be sure to read the rest of this document to learn about
other features.
To Print a Test File
From the Setup menu select Test Print. A small PostScript test file is sent to the Print Monitor and then
printed.
16