Roland ColorChoice Ver. 4.5 - Manual (Page 18)

Abort
A job can be aborted during RIPing or printing. After aborting a job, all RIPed information is lost and the
process must start again.
To Abort a Print Job
1. Click on the job you would like to abort.
2. From the File menu select Abort.
Exit/Quit
The Exit/Quit command ends the program and closes the Print Monitor window.
To Exit Program
From the File menu select Exit/Quit.
Edit Menu
The Edit menu allows you to select all files, delete a file, and change preferences.
Select All
The Select All command selects all files in the print queue.
Delete
The Delete command allows deletion of specifically selected files.
Preferences
Preferences allow access to default settings, including what to do with files after printing and to specify the
units of measurement.
CPSI Scratch Directory [Macintosh Only]
This is the location used to store information during processing. If you have multiple drives, you can use
the Browse button to relocate the Scratch Directory to the drive with the most storage space. This will
allow you to process larger files without generating memory errors.
After Output
Tells the Print Monitor what to do with the job after it has finished printing, either Hold or Delete.
Units
Select the desired unit of measurement.
Simultaneous Ripping and Printing [Windows Only]
The system prints while ripping.
18